Rochem Fyrewash F2

PRODUCT DESCRIPTION

FYREWASH®F2 was developed to give the maximum possible cleaning efficiency and effectiveness from a natural-solvent chemical.

The pine oil solvent & ultra-pure surfactants used in theFYREWASH® F2 formula make it a very safe & user friendly product for both online & offline compressor cleaning.
Approved & meets most major OEMs world-wide.

APPLICATIONS

FYREWASH® F2 can be used with any on-line/off-line injection system but for optimum cleaning results and economic usage of chemicals, Rochem offers a full range of patented manual or fully automatic atomising injection systems to suit any engine type.

ON-LINE CLEANING

Is normally performed by mixing one part FYREWASH® F2 concentrate with four (4) parts of water into a stable solution. Use demineralised water as specified by the engine manufacturer, typically <11µS/cm. The volume of chemical solution needed per wash and the optimum cleaning frequency will depend upon engine size, operating environment and fouling tendency. It is recommended that a post rinse is performed to ensure that the nozzle system is cleaned and ready for next operation.

OFF-LINE, CRANK WASHING

Concentrated FYREWASH® F2 is normally mixed with four (4) parts of good quality water. The solution is injected at cranking speed, allowed to soak for 20 to 30 minutes then thoroughly rinsed off at cranking speed with good quality water acceptable to the engine manufacturer. FYREWASH®F2 can be used without dilution for offline cleaning, providing a superb cleaning result for heavily fouled compressors.

ANTIFREEZE

Add antifreeze below+10°C ,  FYREWASH®F2  is compatible with Methanol, Propylene Glycol, Ethylene Glycol. Rochem manufacture a superior freeze point depressant, Rochem FPD, please contact Rochem for further information.

 NEVER USE UNPROVEN CHEMICALS OR INJECTION SYSTEMS FOR COMPRESSOR CLEANING - ESPECIALLY FOR ON-LINE CLEANING!

FEATURES BENEFITS

• Enables full speed, full load cleaning of gas turbine compressors. Helps maintain output and fuel efficiency without shutting down for crank washing.
• Safely and effectively cleans compressors on-line when runningatanyspeedandload.
• Extremely effective non-solvent cleaner.
• Meets the most stringent requirements of gas turbine manufacturers.
• Ideal for light and frequent on-line washing of any type of industrial, marine or aviation gas turbine to maintain in-service output and fuel efficiency.
•  On-line cleaning reduces damaging shutdown/start-up thermal cycles and starter wear and tear.
• Ideal for off-line cleaning due to high biodegradability.

• Non-flammable.
• Mixes readily with most antifreeze agents to allow low ambient temperature on-line/off-line cleaning.
• Supplied in concentrated form to reduce transportand handling costs and minimise storage requirements.
• World wide product support.

• Backedby Rochem’s unique high value product liability insurance.

APPLICATIONS

For on-line, fired wash cleaning of gas turbine and process compressors.

Also for crank-wash, off-line cleaning of gas turbine and process compressors