Treatment for Pharmaceutical
 |
WATER TREATMENT FOR THE PHARMACEUTICAL INDUSTRY The most successful system for recovery of reusable permeates from primary/ secondary effluent. |
||||||||||||||
| FEATURES No pre-treatment such as UF, NF, Chemical Treatment/ Polishing required Treating rejects of conventional RO systems thereby including savings in evaporation and incineration costs Consistent performance ensures Zero Discharge commitments Over 5,000 m3 treated every day
|
|||||||||||||||
| CASE STUDY | |||||||||||||||||
|
Background: The effluent from the unit is being treated in the existing ETP. There was a requirement to reduce effluent loads through waste water recovery for recycle/reuse to achieve zero discharge. |
Plant Installed: Rochem PF-RO system (Microprocessor controlled, fully fail safe and unattended operation). In put: 800 cum/day of ETP treated effluent as input. Recovery rate: 80% Plant Performance
|
||||||||||||||||
|
Salient Features The installed system treats the input waste water to a level of quality where it can be reused within the factory while reducing the hydraulic load of the waste water to be treated through energy intensive system such as evaporation and incineration General Parameters for Pharmaceutical Units
|
|||||||||||||||||
